How to Stop Your Phone’s Charger Cables From Breaking

Broken lightning charging cable with an iPhoneNor Gal / Shutterstock.com

Frayed load cables can be dangerous to use and expensive to replace. Whether you use a Lightning cable with an iPhone, a USB-C cable with an Android phone, here's how to protect them from breakage.

Take care of your cables

Anker Powerline + Lightning Cableanker.com

The best way to prevent the breakage of your cables is to maintain them properly. In particular, always hold the cable by the plug when you remove it from a device or USB port. Suddenly pulling a cable without doing so will exert pressure on the weakest part of the construction, where the cable joins the plug.

During transport, buckle your cables and keep them tied with a strap or clip if possible. Make sure you route your cable in the proper direction by manipulating it with your hands. The cable will naturally wind in a specific way, which you should always try to reproduce. Some cables, like the Anker Powerline + below, come with a velcro strap for easy transport and storage. The roadie wrap is the best way to wrap your load cables.

Avoid bending cables too tightly or wrapping them too tightly. Flexing of the cable, particularly at the point where the cable connects to the plug, is the main cause of damage over time. If you can not use your device while charging, you will avoid unnecessary cable wear.

You will probably have to change your behavior and break with your old habits, but your cables will thank you for it. If you instinctively grasp your phone in the morning before getting up, take care to unplug the cable first. It is not ideal to lie in bed with the cable that bends forward when you turn around. If you have a habit of throwing your charging cables into a bag for a weekendtake a second to roll them up correctly.

RELATED: How to wrap the charging cables to avoid damaging them

Use cable protectors

Cable protector TUDIA KLIPtudiaproducts.com

Cable guards work by protecting the point where the cable meets the plastic or metal plug. They must be made of a flexible material such as rubber, to allow the cable to flex slightly when you apply pressure. If the cable guard does not flex, it simply moves the point of weakness to the top of the cable.

You can buy a pack of cable protectors for a few dollars online. the TUDIA KLIP is one of the best solutions for Apple Lightning, iPod, MagSafe and Apple Watch chargers. For a cheaper product compatible with just about any USB charger, check out the Jetec multicolored spiral protectors or the Nite Ize CordCollar.

Jetec cable protectoramazon.com

If you're feeling smart, you can add springs to your collars to add tension and prevent the cable from bending to a critical point. For a more resilient home solution, check out the Paracord cord reinforcement tutorial on Instructables.

Almost anything that can prevent your cable from bending excessively will help protect it, whether it's a homemade sheath or a strip of insulation tape.

Prevent accidents with magnetic adapters

Volta Magnetic Charge Adaptervoltacharger.com

While the cables naturally wear out over time, they are damaged by sudden movements. We all accidentally hung a charging cable, sending everything that was charging into the room. When this happens, the cable usually stays in place.

Magnetic adapters take the approach used in Apple's MagSafe power cables (now gone) and apply it to virtually any device you own. Start by placing a small magnetic adapter in the charging port of your device. This adapter then connects magnetically to a charging cable if necessary.

Cables will no longer deform when you inadvertently catch your smartphone because a small force is enough to safely detach the cable. You can buy as many adapters as you want and use the same cable to charge everything. The adapter protrudes slightly from the bottom of your device for easy removal. It could even help keep your cargo port free of lint and other dirt.

Volta is probably the best known magnetic charge solution. For just under $ 20, you'll receive a Volta 2.0 charging cable and two adapter "tips" for Lightning, Micro USB, or Type C USB connections. There are also many affordable solutions available on Amazon and from Amazon.com. 39; other online shopping services.

Do not forget that you will have to stick to one system (or brand) if you want to share the same charging cable between multiple devices. You can even add a cable guard to your magnetic charger for an even more durable solution.

Charge (almost any device) wirelessly

Anker Qi Wireless Chargeramazon.com

Wireless charging is now prevalent in modern smartphones. If you have an iPhone or a recent Android device, it is very likely that it can be charged wirelessly. You will have to buy a Qi wireless charger to use it, like this Anker 10W Wireless Charging Stand, which even supports a fast charge.

It's a way to defeat the broken cable blues. Unfortunately, this prevents you from using your device while charging, but it's a great excuse to turn off and ignore your smartphone for half an hour. Make sure to buy a wireless charger of sufficient power (10W) if you want to use the fast charge. The iPhone X, XS, XR and 8 all include wireless charging, but can only charge up to 7.5 W – and even then only with Specific wireless chargers approved by Apple.

If your device does not natively include wireless charging media, you can easily add it with a cheap Qi receiver. These come in the form of thin chargers that connect to your charging port and attach to the back of your smartphone. Most of them can live under your case, provided your case is not made of metal.

With a Qi receiver installed, your device can receive a charge from Qi wireless chargers. Your charging speed may limit you compared to the native wireless charge, but for around $ 10, the upgrade is fairly inexpensive to be warranted.

Make sure to buy the right Qi receiver for your device, whether you have a Lightning Port, Micro USB type A, or USB-C connection.

RELATED: How to charge your iPhone or iPad faster

Invest in a single cable to govern them all

Fuse Chicken Titan Plus charging cablefusechicken.com

Apple's official Lightning cable costs $ 29 for a 2-meter USB-A to Lightning connector. If you replace one per year, you pay close to $ 90 for three years of iPhone recharge. Why not invest more money in a iPhone charging cable stronger this will not only last but will also save you money in the long run?

the Fuse Titan More Chicken is a USB-A to Lightning 1.5 meter cable. Designed to Apple's Made for iPhone manufacturing standards, it includes data capabilities and can be used as both a charger and a sync cable. It is protected by two layers of flexible steel, with a sealed aluminum housing on each connection. It's yours for $ 37.50.

Fuse also produces a range of cables with USB-C and micro USB connectivity, perfect for Android users. They all come with a lifetime warranty, but be aware that the all-metal construction increases weight and reduces flexibility.

Anker's Powerline + is another very popular charging cable available in Lightning, Micro USB, and USB-C variations. The cable features an aramid fiber core (Kevlar) and a double nylon braid that, according to Anker, will last ten times longer than other cables.

You can also find cheaper cables made with aramid fiber (like Lightning cable and that Micro USB cable) on all commercial sites like Amazon. For best results, combine a durable cable with cable guards and maintain it properly.

RELATED: The most durable Lightning cables for your charging needs

Repair your cables early

Heat Shrink Tubingamazon.com

Frayed cables are dangerous. You are at risk if you continue to use a charger as soon as it begins to show signs of wear. Not only could you damage what you load, but you could also receive a bad shock or start a fire. We recommend that you discard damaged cables for added security.

If you are convinced that your cable is not too damaged or is just beginning to show signs of wear without completely exposing the wiring, you may want to repair your cables. By far, the best way to proceed is to use an electric heat shrink tubing.

You can take a kit of Heat Shrink Tubing for less than $ 10. These tubes fit on your existing wire, and then reduce to size when direct heat is applied. For quick results, use a heat gun, but in many cases a hair dryer will also work with a little patience. The tubing reduces flexibility somewhat, so that they can even be used as cable guards to prevent future wear.

Do not forget: if the condition of a cable makes you uncomfortable, cut it off and throw it in the trash.

Charge your phone in a dock

Belkin ChargeSyncbelkin.com

Home stations for smartphones may not be fashionable, but they serve something. Since the dock does not move, they are not as sensitive to wear as a standard charging cable. You will not read your device in bed, but you will not flex the cable.

The majority of platforms appear to be intended for Apple users, as the Belkin ChargeSync. This is probably due to the fact that a higher percentage of Android devices include wireless charging.

The future is wireless

The cables are fragile and the future entirely wireless has not arrived yet. You do not need to spend a fortune; Make sure you buy good quality cables by avoiding cheap and nasty cables. If you are an Apple user, make sure you only buy cables that comply with Apple iPhone Standards (MFi).

If your device is charging via USB-C, you will want to be extremely vigilant for you choose a safe USB-C cable that will not damage your devices.

Advertisements

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.